Shanghai Toyou Industry Co.,Ltd

A leading manufacturer with 15 years' experience in production!

Disk Damper for Auditorium Seating and Chairs TRD-57A-L403 One Way Single Way Rotary Damper

Disk Damper for Auditorium Seating and Chairs TRD-57A-L403 One Way Single Way Rotary Damper

Disk damper for auditorium seating and chairs TRD-57A-L403 one way single way rotary damper

Send Inquiry
Product Details

Disk damper for auditorium seating and chairs TRD-57A-L403 one way single way rotary damper

Model

Max.torque

direction

TRD-57A-R303

3.0±0.3N·m

Clockwise

TRD-57A-L303

Counter-clockwise

TRD-57A-R403

4.0±0.5 N·m

Clockwise

TRD-57A-L403

Counter-clockwise

TRD-57A-R503

5.0±0.5 N·m

Clockwise

TRD-57A-L503

Counter-clockwise

TRD-57A-R603

6.0±0.5 N·m

Clockwise

TRD-57A-L603

Counter-clockwise

TRD-57A-R703

7.0±0.5 N·m

Clockwise

TRD-57A-L703

Counter-clockwise


Features:

100% performance test

Environment test

Oil leakage test

Lifecycle test>50000 times 

ISO9001:2008

ROHS directive

Max.rotation speed 50rpm

Max.cycle rate 12 cycle/min

Operating temperature –10􀊙50°C

Weight TRD-57A : 75g, TRD-57A : 94g

Main body material Iron (SPFC)

Oil type Silicone oil


Size


How to use the damper
1.Dampers may generate torque in both directions, clockwise, orcounter-clockwise.
2.Please make sure that a shaft attached to a damper has a bearing, as the damper itself is not fitted with one.
3.please refer to the recommended dimensions below when creating a shaft for TRD-57A. Not using the recommended shaft dimensions may cause the shaft to slip out.

Shaft’s external dimensions

ø10 0–0.03

Surface hardness

HRC55 or higher

Quenching depth

0.5mm or higher

Surface roughness

1.0Z or lower

Chamfer end (Damper insertion side)

 

4.To insert a shaft into TRD-57A, insert the shaft while spinning it in the idling direction of the one-way clutch. (Do not force the shaft in from the regular direction. This may damage the oneway clutch.)

5.When using TRD-57A, please ensure that a shaft with specified angular dimensions is inserted in the damper's shaft opening. A wobbling shaft and damper shaft may not allow the lid to slow down properly when closing. Please see the diagrams to the right for the recommended shaft dimensions for a damper.

 

Damper Characteristics

1.Speed characteristics
A disk damper's torque varies according to the rotation speed. In general, as shown in the graph to the right, the torque increases as the rotation speed increases, and the torque decreases as the rotation speed decreases. Torque at 20rpm is shown in this catalogue. In a closing lid, the rotation speed is slow when the lid begins to close, resulting in the generation of torque that is smaller than the rated torque.

2.Temperature characteristics
Damper torque (rated torque in this catalogue) varies according to the ambient temperature. As the temperature increases, the torque decreases, and as the temperature decreases, the torque increases. This is because the viscosity of the silicone oil inside the damper varies according to the temperature. The graph to the right illustrates the temperature characteristics.

 

Welcome to purchase high quality and precise disk damper for auditorium seating and chairs trd-57a-l403 one way single way rotary damper from Toyou Industry - one of the leading such manufacturers and suppliers. We have been specialized in this field for over 15 years. And we offer customers the most competitive price. Don't hesitate any more.

Inquiry